VENCHA Raven, Инструкция по эксплуатации

Страница: 10 / 19

8. Seat the down rod ball assembly into the bracket, ensuring the notch of the hanger ball is positioned on
the stopper of the hanger bracket to prevent the fan from rotating when in operation. Install the safety
wire to the ceiling, the safety wire must be adjusted as short as possible and secure until snug.
9. Connect wires according to diagram below.
Note: For safe use of this fan, and all-pole disconnection MUST be incorporated into the fixed wiring in
accordance with the wiring rules. As outlined in clause 7.12.2 of AS/NZS 60335-1 for meeting the minimum
electrical safety of this standard. A single-pole switch also must be placed in the same room as ceiling
fan as per local wiring regulations AS3000.
Multiple Fans: If there are two or more DC ceiling fans installed in the one location/room, an isolation
switch is required for EACH ceiling fan. This is required when pairing the remote transmitter and receiver
together.
Warning: For your safety, all electrical connections must be undertaken by qualified licensed electrician
a. Connect mains electrical connection to terminal block on mounting bracket
b. Connect all ceiling fan wires through quick connecter plugs supplied.
c. Once all connected, slide receiver into mounting bracket, above hanger ball.
Safety Wire
Screws
Screws
Canopy
Mounting
Bracket
10
Mounting Bracket Remote Receiver
Wiring Loom