26040 Ynez Rd. Temecula, CA 92591 | PH: 951.325.6340 | www.QuietCoolSystems.com
Solar Utility Fan Installation Instructions
READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING YOUR SOLAR UTILITY FAN
SAVE THIS MANUAL FOR FUTURE REFERENCE
DESCRIPTION
• Solar Utility Fan for any application imaginable such as:
• Sheds
• Portable Restrooms
• Dog Houses
• Small Green Houses
• and more!
• High efficiency brushless motor operates in low light and overcast conditions
• No wiring required - completely self-contained unit - mount it and forget it!
• Avoid heat build-up in the space you are ventilating
INCLUDED IN THE BOX
• (1) Solar Utility Fan with integrated solar panel
• (1) Installation Manual
SPECIFICATIONS
• Solar Panel: polycrystalline 5.5V, 2.5W
• DC Fan: 5V 2W
• RPM: 2500 RPM
• Airflow: 33 CFM
• Motor Type: DC Ball Bearing
• Noise Static Pressure: 27 dh
INSTALLATION
The installation of the QuietCool Solar Utility Fan is very easy to do.
Simply cut a 3.25” hole into the roof or wall in which you want to install the fan. We recommend using a hole saw to
perform this cut very easily.
Unscrew the holding plate from the back of the fan unit and insert the fan into the hole. Screw the holding plate onto the
fan and secure tightly.
The fan unit will run automatically when there is sunlight present.
WEATHERPROOFING
We recommend adding a soft rubber o-ring type material between the roof or wall and the unit to ensure no water can
seep through the hole. As an alternative, you can also use any type of roofing grade weatherproof sealant to seal around
the fan unit.
OPERATION
The QuietCool Solar Utility Fan will operate continuously when sunlight is between 10,000 and 40,000+ lux. Below 10,000
lux, the fan will operate intermittently.
