Vemco HR2, Руководство пользователя

Страница: 79 / 212

4.3 Offloading Data
After data have been collected by an HR2 Receiver during a long term deployment, that data must be
offloaded to be accessed and viewed.
Data can only be offloaded from a HR2 Receiver while it is in communication with Fathom software,
through a direct cable connection.
To offload data from your HR2 Receiver, using Fathom
Establish communication between the HR2 and the Fathom software (see "Establishing
Communication", on page 24 ).
Step 1 - Offload Data button
On the HR2 Receiver Tab , click the Offload Data button.
NOTE:
This button is not available before communication between the receiver and
Fathom is established.
Step 2 - Select Offload folder
Select the Offload
folder
to use.
To select a different folder than the default one
displayed, click Change and navigate to the desired
folder and click OK .
Step 3 - Select Offloading Data Option
Select an offload data option (see image in previous step):
l
Offload All Data - All data collected by the receiver will be downloaded.
l
Offload New Data - Only new data collected by the receiver (since the last offload operation)
will be offloaded.
70
HR2 Receiver User Guide