Vemco HR2, Руководство пользователя

Страница: 34 / 212

Step 3 - If no receiver is detected
When no receiver is detected, a receiver
icon will not be displayed and you must
manually initiate the connection.
l
Click the Scan for Devices button to
rescan for receivers (top left).
l
If you are using a COM port for
connection on the computer, click a
COM port and select HR2 from the
box that pops up, to establish receiver
communication on that port.
If you are not sure which COM
port the receiver cable is
connected to, unplug the cable
and watch which COM port
disappears from the COM Ports
display. Plug the cable back in
and attempt to connect to the
receiver using the identified COM
port.
l
If you are unable to connect to the
receiver, disconnect the cable from
the computer, then the receiver, then
reconnect to receiver and computer
and try this again.
If you still are unable to connect to the
receiver, consult our Customer Service
website .
Step 4 - Displaying additional information
Additional information about the receiver
can be displayed by hovering over the
receiver’s icon with the mouse. Available
information includes the
Cable ID number,
and the Communication Port used.
25
2.6 Establishing Communication