Vemco HR2, Руководство пользователя

Страница: 88 / 212

Step 4 - Latch and tighten
Latch and tighten the cable tie so the head of the cable tie is next to
the rope.
(VR2Tx example shown)
Step 5 - Slide, latch and tighten
Open the warp in the rope again and slide another cable tie through
rope so it lines up with the bottom half of the lower groove around
the body of the HR2. Tighten the cable tie so the tie’s head is next
to the rope.
(VR2Tx example shown)
Step 6 - Slide, latch and tighten
Wrap a third cable tie around the HR2 receiver and the rope so the
cable tie occupies the top half of the lower groove in the HR2 body.
The bottom half of the groove is already occupied by the cable tie
from Step 5 Latch the cable tie so the head of the cable tie is over
the rope.
(VR2Tx example shown)
Step 7 - Slide, latch and tighten
Open the warp in the rope next to the groove closest to the hydrophone
and slide another cable tie through rope so it lines up with the top half of
that groove. Tighten the cable tie so the tie’s head is next to the rope.
79
5.3 Mooring Line Attachment