Vemco HR2, Руководство пользователя

Страница: 60 / 212

3.6 Watch Table Tab
The
Watch Table Tab
displays a list of tags of interest and is extremely helpful in identifying if a
particular tag was in the area surrounding a receiver.
The tag information is entered in the Watch Table, where each tag entered is assigned an Index number
between 1 and 192. When completed, this list is sent to the receiver through the communication cable
and accessed using the VR100 while the HR2 is deployed.
NOTE:
The instructions on how to access the Watch Table using the VR100 are
found in the VR100 documentation.
Figure 3-22: Watch Table Tab
3.6.1 Adding Tag IDs
Tag ID and Code Space information was shipped with the tag.
1. Select the Code Space from the drop-down list.
2.
IMPORTANT: Currently, you cannot enter sensor tags into a Watch Table.
2. In the ID field, enter the Tag ID of the tag you want added to the table.
3. Repeat Steps 1 and 2 to add tags until the Watch Table is complete based on your
needs. You may add up to 192 entries .
NOTE:
All entries change to red text until you apply the changes.
4. Click
Apply Changes
.
If you wish to organize your entries in "groups", you may skip one or more lines in the table, as
desired. For example, you could have entries from 1 to 24, then skip to 31-45, etc. This may provide
easier visual reference when you are consulting the table. Having "gaps" in the list is acceptable.
51
3.6 Watch Table Tab