VEMAG HP10E Скачать руководство пользователя страница 37

Страница: 37 / 167

HP10E / HP12E / HP15E / HP20E - Dairy design

5. Operation

5-3

5.2 Working with provisional drive

Should the portioning computer of the machine fail, it is possible to conti-

nue operating the machine using provisional drive. In this mode, you can

run the machine hopper empty at approx. 50 % of nominal speed.

Danger!

The front door of the machine must be swung open to run the hopper

empty.

Risk of crushing, dragging in and burns.

Proceed with extreme caution and do not reach into the inside of the

machine.

•  Press the OFF key on the machine control panel.
•  Switch off the main switch of the machine.
•  Swing open the front door.

Section 8.1

•  Switch the main switch of the machine back on.
•  Press the ON key on the machine control panel.
•  Press push-button S10 on the switch cabinet for the drive controller

and keep it depressed until the hopper of the machine has run empty.

•  Inform VEMAG Customer Service.
•  Press the OFF key on the machine control panel.
•  Switch off the main switch of the machine.

Содержание HP10E








































































































































































Результаты поиска

Содержание HP10E

Отзывы:

Бренды по названию

Популярные бренды

VEMAG HP10E, Руководство по эксплуатации

Результаты поиска

Содержание HP10E

Отзывы:

Бренды по названию

Популярные бренды