VEMAG HP10E, Руководство по эксплуатации

Страница: 36 / 167

HP10E / HP12E / HP15E / HP20E - Dairy design 5. Operation
5-2 © VEMAG 2013
• Use the portioning computer to select a filling program and check
whether the double screws are correctly selected in the portioning
computer.
Section 6
• Set the vacuum required for the product to be filled at the vacuum
control valve.
Section 4
Warning!
You must interrupt the filling process and check the seals of the double
screw drive if vacuum level falls uncontrollably during production.
Sections 7 and 8
• At the start, allow the machine to run at a slow speed (max. 20 %)
until product escapes at the outlet.
This prevents the pumping element “running dry”. When filling hot pro-
ducts, wait about 1 minute to start production. This ensures that all
machine parts which come into contact with the product are heated to
product temperature.
Danger!
There is a risk of injury at the filling horn (optional) from products being
ejected under high pressure. Proceed with extreme caution to prevent
injuries.
• Operate the knee lever to start the filling process.
When production is finished, proceed as follows:
• Press the OFF key on the machine control panel.
• Switch off the main switch of the machine.
• Clean the machine in accordance with the instructions in the cleaning
schedule.
Section 7
• Take the appropriate maintenance measures if necessary.
Section 8