manualshive.com logo in svg

VEMAG HP10E, Руководство по эксплуатации

Поделиться
Скачать
VEMAG HP10E Скачать руководство пользователя страница 141

HP10E / HP12E / HP15E / HP20E - Dairy design

8. Maintenance

8-9

© VEMAG 2013

•  Guide the feed screw (1) into the hopper in such a way that the three 

sliding sleeves (2) are located behind the shoulder (3) of the hopper 

flange.

•  Push the sliding sleeves outwards so that they engage behind the 

shoulder, holding the feed screw steady with the other hand.

•  Carefully press the sealing ring into the appropriate groove in the hop-

per insert. Fit the sealing ring without greasing it. 

 Section 7.2.6

•  Lubricate the sealing ring (4) in the hopper insert by hand.
•  Turn the feed screw so that the sliding sleeves can engage in the 

recesses of the catch ring (5).

•  Close the hopper and lock the two locking levers (6) on the hopper 

housing.

1  Feed screw

2   Sliding sleeves

3   Shoulder

4   Sealing ring

5   Catch ring

6   Locking levers

Fig. 8-8

Lubricating the feed unit 

seals

6

6

2

1

3

5

4

Содержание HP10E








































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды