![background image](http://html1.mh-extra.com/html/vem/kp-series/kp-series_operating-and-maintenance-instruction-manual_3988237006.webp)
Physikalisch-technische
Bundesanstalt
PTB
Braunschweig und Berlin
__________________________________________________________________________________________________________________
EC-type-examination Certificates without signature and official stamp shall not be valid. The certificates may be circulated only without alteration.
Extracts or alteriations are subject to approval by the Physikalisch-Technische Bundesanstalt. In case of dispute, the German text shall prevail.
Pysikalisch-Technische Bundesanstalt . Bundesallee 100 . D-38116 Braunschweig
(1)
EC-TYPE-EXAMINATION CERTIFICATE (Translation)
(2)
Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres –
Directive 94/9/EC
.
(3)
EC-type-examination Certificate Number
:
PTB 99 ATEX 1098
(4)
Equipment:
Three-phase motor of the type series K8. 56..., K8.. 63..., K8.. 71...,
K8.. 80..., K8.. 90..., K8.. 100..., K8.. 112..., K8.. 132...,
K8.. 160..., K8.. 180..., K8.. 200..., K8.. 225..., K8.. 250...,
K8.. 280..., K8.. 315..., K8.. 355...
(5)
Manufacturer: VEM motors GmbH
(6)
Address:
Veckenstedter Weg 23, D-38855 Wernigerode
(7)
This equipment and any acceptable variation thereto are specified in the schedule to this
certificate and the documents therein referred to.
(8)
The Physikalisch-Technische Bundesanstalt, notified body No.0102 in accordance with
Article 9 of the Council Directive 94/9/EC of 23 March 1994, certifies that this equipment
has been found to comply with the Essential Health and Safety Requirements relating to the
design and construction of equipment and protective systems intended for use in potentially
explosive atmospheres, given in Annex II to the Directive.
The examination and test results are recorded in the confidential report PTB Ex 99-19163
(9)
Compliance with the Essential Health and Safety Requirements has been assured by
compliance
with
EN 50014:1997 EN 50018:1994 EN 50019:1994
.
(10) If the sign „X” is placed after the Certificate number, it indicates that the equipment is
subject to special conditions for safe use specified in the scheduleto this certificate.
(11) This EC-type-examination Certificate relates only the design and construction of the
specified equipment in accordance with Directive 94/9/EG. Further requirements of this
Directive apply to the manufacture and supply of this equipment.
(12)
The marking of the equipment shall include the following:
II 2 G EEx d IIC T3 – T6 or EEx de IIC T3 – T6
Zertifizierungsstelle Explosionschutz
Braunschweig, 4 August 1999.
By order
(signature)
Dr.-Ing. U.Klausmeyer