Velleman CTC1000, Руководство пользователя

Страница: 6 / 219

CTC1000
V. 04 – 11/02/2016 6 ©Velleman nv
When the control panel asks you to key in ENTER CODE or P-CODE, please enter your user pin code.
When the display panel asks you to key in M-CODE, please enter your master code.
•
For details about the pin code, see section 7.4 Pin code.
• For details about the master code, see section 7.7 Master Code.
6.5 First use
Assuming you have found a suitable location:
1. Apply the AC power to the control panel. You will hear a long beep. Alarm On will be displayed on the first
line and 00:01 01 Jan displayed on the second line of the screen indicating the system is in Away Mode
(this is the default Mode)
2. Press button 1 on the keypad.
3. Key in the pin code for user 1 (default code is 1234) within 30 seconds.
You can press to clear the code.
4. Press the OK key (within 30 seconds).
You will hear 2 short beeps and the display will show:
The system is now in alarm off mode.
5. Wait for 2 to 3 minutes for the system to read it status. If the yellow LED turns on, it indicates that there is
an error. Refer to section 14 for details.
Notes
• The control panel has a screen saver function.
The Alarm off message will be displayed for 180 seconds. After that, the display shows only current date
and time.
7. Configuration
To enter Program mode:
1. Make sure the alarm is off (see section 11.4).
2. Press the # key. The display shows:
3. Within 30 seconds, key in 1234 (default User1 pin code) and press OK.
The display shows:
4. Within 30 seconds, enter 1111 (default Master Code) and press OK.
For 2 seconds, the display shows:
5. Then the program menu will be displayed:
It is highly recommended to change the User 1 pin code and the master code on first use.
Cursor
•
The cursor is indicated by a flashing dot in the left upper corner.
•
Use the keys

and

to move the cursor.
•
Press OK to confirm.