![background image](http://html1.mh-extra.com/html/velleman/camip7/camip7_user-manual_3952416016.webp)
CAMIP7
13.01.2011
©
Velleman nv
16
Log
•
The log shows an overview of everyone who accessed the IP camera. It is cleared when rebooting
the system.
Back
•
Use this option to return to the
For Visitor
or
For Operator
page layout.
9.
Additional user information
9.1 Password
•
Default, the administrator login is
admin
without a password. To enhance security, a new
administrator password should be set as soon as possible (see
§8.2
under
For Administrator
layout – Users Settings).
•
If the login or password of the administrator(s) are forgotten or corrupt, the system can be reset
to factory defaults (
admin
, no password) by pressing and holding the
RESET
button
[11]
for
about 5 seconds.
9.2 WiFi
•
Refer to the user manual of your wireless router to obtain network information e.g. SSID,
Channel, Security, authentication, encryption…
•
Use previously obtained information to configure your
CAMIP7
via a fixed network cable (
For
Administrator
– Wireless LAN settings).
•
Reboot the
CAMIP7
.
•
Wait at least 30 seconds before unplugging the network cable. Then unplug the power supply.
•
Re-insert the power plug.
•
After about 30 seconds, the camera should be up and running in WiFi mode.
9.3 Connect the camera on an ADSL network
•
Connect the camera to a PC. The easiest way is to use a router. If no router is available, you
must use a cross cable (not incl.) to connect the CAMIP7 directly to the PCs’ RJ45 port and set
the IP addresses on PC and camera manually.
•
Configure the camera with the IP camera tool (see §8.1).
•
Log on to the camera as administrator and configure
ADSL settings
(user name + password).
•
Configure the
DDNS Service Settings
and click ‘Submit’. The camera reboots.
•
Connect the camera directly to the ADSL modem. It is now available through the internet by
entering the domain name in your internet browser.
Note:
set the option ‘Report ADSL IP by mail’ under
Mail Service Settings
to receive the
cameras’ IP address by mail.
9.4 Connect the camera via a router
•
Connect the camera to the LAN and configure the camera with the IP camera tool (see §8.1).
•
Log on to the camera as administrator and configure
DDNS Service Settings
.
•
Click ‘Submit’ to reboot the camera.
•
The camera is now available through the internet by entering the domain name in your internet
browser.
Содержание CAMIP7
Страница 2: ...CAMIP7 13 01 2011 Velleman nv 2 Figure...