CAMIP5N
V. 02 – 22/05/2012
17
©Velleman nv
•
Check the
Send Mail on alarm
checkbox to send a mail when an alarm is detected. Make sure to fill out all
fields on the
Mail Service Settings
page (see above).
•
Check the
Upload Image on alarm
checkbox to upload images to an FTP server when an alarm is
detected. Make sure to fill out all fields on the
FTP Service Settings
page (see above). When this option is
checked, you can also set the upload interval (in seconds).
•
Check the
Scheduler
checkbox to open the day schedule. Click on the schedule to set the time during
which alarm service must be enabled. Horizontal axis = hours, divided per 15 minutes and vertical axis =
day of the week.
PTZ settings
Set PTZ speeds for the different directions.
Upgrade Device Firmware
Only use this option when problems with the current version are noticed. Do not upgrade if the camera works
fine.
Caution
: when the upgrade process is interrupted or a wrong version is installed the camera might not work
anymore.
When clicking on
Upgrade Device Firmware
or
Embedded Web UI
(User Interface), a browser window is
opened. Locate and select the new firmware/web UI.
Backup & Restore settings
Use this option to create a backup or restore your system configuration.
To create a backup, click
Submit
and choose a location to store the backup file.
To restore a previously made backup, click
Browse
to locate the backup and click
Submit
to start restoring.
Restore Factory Settings
Selecting
OK
will clear the memory and reset the device to factory settings. All settings, e.g. user settings, mail
and FTP settings, alarm schedule… are lost.
Reboot Device
Select
OK
to reboot the camera.
Note
: this will reset the system time. Refer to
Date&Time settings
.