CAMIP5N
V. 02 – 22/05/2012
10
©Velleman nv
Note
: when the camera is in auto tilt/auto pan mode, motion detection and external alarm input are disabled!
•
Check the
Flip
checkbox in case the image is shown upside down.
•
Check the
Mirror
checkbox to mirror the image.
•
Set the resolution to 320*240 or 640*480.
•
Set the mode to 50Hz or 60Hz.
•
Set the brightness and contrast of the image with the “+” and “-” buttons.
Note
: the camera is not suitable for outdoor use! The outdoor setting could be used in case the camera is
pointed towards a bright natural light source.
8.5
For Administrator layout
The
For Administrator
layout is only available when logged in with an administrator account. It is used for
advanced configuration of the cameras.
Notes:
•
Select the desired camera before opening the
For Administrator
layout.
•
Depending on the ticked checkboxes, different data entry fields are shown. Hence the display you see for a
certain option might differ from the images used below.
Device info
Device ID, firmware version and Web User Interface version are shown (see image above).
Alias Settings
Set the name of the selected camera.
Date&Time Settings
Set date and time data for the camera.
Note
: if the timestamp on the display shows the wrong time, try checking the
Sync with PC Time
checkbox
and press
Submit
.