Velatia ORMAZABAL gae.630 Скачать руководство пользователя страница 33

Страница: 33 / 64

IG-322-EN version 03; 22/07/2022

General instructions

-insulated circuit-breaker panel:

Type

gae

.630 -1LSV(G)-/5/

in modular extensible design up to 24 kV, 20 kA

Technical description

The front cover interlock (Figure 4.7) ensures that the front

cover can only be removed, when the earthing switch has

been operated. When the earthing switch is switched OFF,

a bolt engages in a recess in the front cover, thus locking it.

The interlock between the circuit- breaker and the

disconnector or earthing switch (Figure 4.8) is effected

with the aid of the operating lever. It can only be changed,

when the circuit-breaker is switched OFF. Whereby the

switch positions of the disconnector or earthing switch are

immaterial.

The interlock between the disconnector and the earthing

switch (Figure 4.8) is effected by the switch position

indicator. This closes off the plug-in opening for the

switching lever on the corresponding switching shaft.

An anti-reverse interlock (Figure 4.8) is available upon

request.

This prevents the disconnector from being switched ON

when the front cover has been removed. The anti-reverse

interlock is switched ON or OFF by the fastener key.

When the fastener is open, the plug-in opening for the

switching lever on the disconnector switching shaft is

closed off by a plate.

With the front panel removed the earthing switch can be

switched off in order to check the cables.

4.10. Current transformer

Low voltage toroidal transformers and spectacle-shaped

core transformers in accordance with IEC 61869 are used

around the extended outer taper bushings in the circuit-

breaker panels.

The protection and optional measurement cores are

integrated into a common transformer block.

The current transformers are optionally provided with an

calibratable or calibrated measurement core.

It is possible to remove or replace the current transformers

simply, without opening the gas tank. It is also possible

to use window type current transformers that are fitted

around the earthed cable sheath of the conductor cables

in the cable duct.

Current transformer

Figure 4.9.

Содержание ORMAZABAL gae.630

































































Результаты поиска

Содержание ORMAZABAL gae.630

Отзывы:

Velatia ORMAZABAL gae.630, Руководство пользователя, Страница: 33 / 64

Результаты поиска

Содержание ORMAZABAL gae.630

Отзывы: