Veit SF26 страница 31 Скачать руководство пользователя

Страница: 31 / 149

Overland shipment

The machine is delivered by truck or train.

Overseas shipment

In case of overseas shipment, the machine will be welded into

a plastic sheet and provided with a drying agent. The machine

will be shipped in a sea freight container.

NOTICE!

The drying agent is designed for storage of 3

months and has to be renewed if the machine is

stored for a longer time.

Prior to shipment, a transport insurance contract

may be concluded following consultation.

Storage conditions

Closed and dry room with a room temperature between -25°C

and +55°C.

Upon delivery, the packaging of the machine and spare or replace-

ment parts is designed for storage of 3 months.

5.2 Unloading and transport to the place of installation

WARNING!

– Make sure that the lifting equipment is

designed to carry the weight of the machine.

Chains, ropes, hooks, lifting eyes and cross

members must be designed to carry the weight

of the machine as well.

– If no lifting equipment is available, a transport

company has to be engaged for unloading and

transporting the machine.

– Pay attention to the machine’s centre of gravity.

The machine must be secured before being

transported.

– Avoid shocks and pay attention to hoses on the

earthing plate.

There is a risk of injury and

machine damage.

– It is forbidden to stay under suspended loads!

Transport and packaging

Unloading and transport to the place of installation

18.07.2017

Shirt finisher VEIT SF26

Содержание SF26






















































































































































Результаты поиска

Содержание SF26

Отзывы:

Похожие инструкции для SF26

Бренды по названию

Популярные бренды

Veit SF26, Руководство по эксплуатации

Результаты поиска

Содержание SF26

Отзывы:

Похожие инструкции для SF26

Бренды по названию

Популярные бренды