manualshive.com logo in svg

Veit SF26, Руководство по эксплуатации

Описание продукта Veit SF26: Бесплатное руководство по эксплуатации для Veit SF26 доступно для загрузки на manualshive.com. В этом руководстве вы найдете все необходимые инструкции по установке и использованию вашего устройства. Скачайте его прямо сейчас, чтобы быть в курсе всех возможностей Veit SF26.

Поделиться
Скачать
background image

3.4.2  Safety measures

(To be carried out by the operating company)

The operating company is responsible for:

n

Training their operating and maintenance personnel in the use

of the machine's safety devices

n

Monitoring their operating and maintenance personnel to

adhere to the safety measures

n

Ensuring that unauthorised persons (i.e. no operating or main-

tenance personnel) are prevented from entering the danger

zone of the machine.

The statutory minimum age for operating and maintenance per-

sonnel must be observed.
These operating instructions must be retained for future use.
The prescribed frequency of inspection and control measures must

be observed.
In these operating instructions, the operations to be carried out are

described in such a way that

n

An 

instructed person

 can understand the instructions given in

chapter OPERATION

n

An 

authorised person

 can understand the instructions given

in chapter MAINTENANCE

n

A 

qualified person

 can understand the instructions given in

chapters TRANSPORT, INSTALLATION, SETTING UP and

MAINTENANCE

In the REMEDY OF FAULTS/ELIMINATION OF DEFECTS chapter,

the responsible person/qualified person is specified depending on

the type of fault.

A person who has been introduced to the tasks assigned to

him/her and the possible dangers that can result from improper

behaviour, who has been appropriately trained and who has been

instructed in the necessary safety devices and safety measures.

A person who operates the machine on a regular basis and who

has been instructed by a qualified person from VEIT GmbH, partic-

ularly with regard to setting up and servicing the machine, unless

agreed otherwise in the purchase contract.

A person who, because of her/his education, knowledge and expe-

rience and their knowledge of relevant standards, has been author-

ised to carry out any operations and who is able to recognise any

possible dangers.

The definition follows EN 60204

‑

1:2006+A1:2009.

Instructed person

Authorised person

Qualified person

Safety

Built-in safety systems > Safety measures

18.07.2017

Shirt finisher VEIT SF26

22

Содержание SF26






















































































































































Отзывы:

Нет отзывов

Похожие инструкции для SF26

Бренды по названию

Популярные бренды

Загрузить еще бренды