Veit SF26, Руководство по эксплуатации

Страница: 79 / 149

Error message Cause Remedy
12 Error condensate temp. MFP
KT2
Temperature sensor signal of con-
densate connection for external
cuff tuck press faulty.
Check the temperature sensor
and replace if necessary.
Check the wiring of the tempera-
ture sensor.
13 Error condensate temp. heat.
reg. KT1
Temperature sensor signal of con-
densate connection for solenoid
valve faulty.
Check the temperature sensor
and replace if necessary.
Check the wiring of the tempera-
ture sensor.
14 Error condensate temp. heat.
reg. KT0
Temperature sensor signal of con-
densate connection for internal
heating register faulty.
Check the temperature sensor
and replace if necessary.
Check the wiring of the tempera-
ture sensor.
15 Error analog value moisture Insert for detecting the residual
moisture (in the front clamp) not
connected.
Connect the insert to the residual
moisture control system.
Signal of the residual moisture
control system faulty.
Check the residual moisture con-
trol system and replace, if neces-
sary.
Replace the insert for detecting
the residual moisture.
Check the wiring of the residual
moisture control system.
16 Error moisture activation
threshold
The current moisture threshold
value is out of range of plausible
values.
Calibrate the residual moisture
control system (see manual
mode).
If this error occurs after calibration
and subsequent error acknowl-
edgement, please contact your
VEIT subsidiary.
18 Error motor energy recycling Winding temperature of the motor
too high.
Check the fan wheel for ease of
movement.
Motor load too high.
Motor blocked.
Insufficient cooling.
Clean the motor (remove deposits
of dirt and dust, particularly on the
fan plate).
19 Error frequency inverter U1 Numerous error causes Read the error code on the fre-
quency inverter; please contact
your VEIT subsidiary.
20 Emergency Switch Emergency stop device was acti-
vated.
Release the emergency stop
device.
Acknowledge the error message
with the "Stop" button.
Remedy of faults/elimination of defects
Alarm messages on the touch screen > Error messages
18.07.2017 Shirt finisher VEIT SF26 79