16 / 43
automatic IRIS opening option is enabled (the default setting is on). In this case, the opening will be controlling
automatically again.
Refer to the specific section for additional details on IRIS opening adjustment
4.4.5. PRESET POSITIONS PROGRAMMING AND RECALLING
The camera can store up to 256 panning, tilting and zooming configurations (called preset positions) which can be
recalled at any time. The manual focusing and IRIS opening settings cannot be stored.
When storing presets, it is important to remember that some are reserved and cannot be either stored or used for
positioning the camera. Presets from 80 to 99, Presets from 100 to 103, 170 to 173
The following examples show how to program the free Presets and recall them.
Example: programming preset number 32
1)
Position the camera in a certain pan, tilt and zoom configuration.
2)
Enter the command
PRESET
+
32
+
ENTER
.
From this moment on, simply enter the command
CALL
+
32
+
ENTER
to move the camera to the preset position.
The saved value will be written over if the setting is reprogrammed.
The Presets are saved in a permanent memory area of the camera where they are maintained also when power
is disconnected. However,
RESTORE FACTORY DEFAULT
will delete all preset values.
Press
PRESET
+
83
+
ENTER
to delete all the saved presets.
The Presets store the coordinates according to an angular reference system. Therefore, the reference system
zero point may become misaligned with the camera mechanics after prolonged use of the tilting and panning
functions. Minor inaccuracies in preset positions may occur. In this case, calibrate the angular coordinate system
using the
REBOOT SYSTEM
command. This calibration is automatically run when the camera is switched on.
4.5. FUNCTION PROGRAM MENU
Use the following control panel command to access the function programming menu.
PRESET
+
95
+
ENTER
At this point, if no password is required for access, the following first level menu will appear on the screen:
MAIN MENU
< SYSTEM INFORMATION >
< DISPLAY SETUP >
< DOME SETTINGS 1 >
< DOME SETTINGS 2 >
< DOME LABEL >
RESET CAMERA
REBOOT SYSTEM
LANGUAGE
ENGLISH
EXIT
Screen 1: Main Menu
Otherwise, if a password is required, the following prompt will appear.
PLEASE INPUT PASSWORD
PASSWORD
1 2 3 4 5 6 7 8 9 0
▲
CLEAR
ENTER
EXIT
Screen 2: Password Protection
The password is a numeric combination (max. 4 digits).
