8 / 43
Step 1.
Prepare In-ceiling
Pic. 13
Locate the center point of the in-ceiling mounting location. Insert the compass tool into the hole. Draw a circle on the
ceiling using the compass tool and a pencil. See Pic. 14 (Left).
Cut the circle out of the ceiling tile. See Pic. 14 (Right).
Pic. 14
Put the reinforcing metal plate (see following pic.) on top of the ceiling (behind the ceiling) with the two circles aligned
vertically.
Pic. 15
Step 2.
Install back box
Pic. 16
Take out bracket from back box. Insert the back box into ceiling. See Pic. 16.
Install a safety chain/cable (not supplied) that can stand up to 32 pounds (14.6kg). Press the thumb fastener and open the
hinged door to the back box. Take out hole of pin. See Pic. 17
