Veigel BHA23-016, Инструкция по установке и эксплуатации

Страница: 24 / 44

4-9
Assembly
Connect the plug to the VEA box.
Fasten all loose cables and
check that the relevant plugs are
seated securely.
Re-attach the trim panel to the
dashboard in the driver's side
footwell.
Assembling the VEA
Fig. 4-7: Plug detached from VEA box
• Start the vehicle. The VEA should be adjusted to the original accelerator pedal.
Make sure that the original accelerator pedal is active and working correctly.
Switch the vehicle off.
• Start the vehicle again and, within the next 6 seconds, press the switchover
button once for 1 second to change the pedal.
• If controlled accelerating is not working properly, check all plugs and make
sure that the cabling is correct.
• The default setting on delivery is Mode 1; Mode 1 = automatic switchover to
the original accelerator pedal. This happens each time the vehicle restarts.
VEA functional check
Fig. 4-8: Plug attached to VEA box
Fig. 4-9: Power supply for VEA box
Connect the power supply between
the VEA and the vehicle:
Terminal 15 – black cable
Terminal 30 – red cable
Earth – brown cable
It is recommended to disconnect
terminals 15 and 30, preferably in
the fuse box.