Veigel BHA23-016, Инструкция по установке и эксплуатации

Страница: 25 / 44

4-10
Assembly
Teaching in the VEA
1. Ignition off
2. Plug the TEACH-IN adapter into
the black mating connector.
3. Ignition on
4. Status LED flashes slowly (ready
for teach-in)
5. Status LED flashes quickly
(wiring error; start from point 1 to
rectify it)
6. Fully depress the original accel-
erator pedal module (hold down for
approx. 2 s)
7. Fully depress the additional
accelerator (hold down for
approx. 2 s)
8. Press the button for approx. 1 s
to confirm the teach-in process
(5x slow flashing means teach-in
was successful, go to point 10/
fast flashing means teach-in was
unsuccessful)
9. If teach-in was unsuccessful,
start from point 1. If the process
fails again, perform troubleshooting
and, after rectifying the error, go to
point 1
10. Ignition off
11. Unplug the TEACH-IN adapter
12. Ignition on and test
Fig. 4-10: Teaching in the VEA
The teach-in process must have been completed successfully prior to
commissioning.