17
6 Setup with smartphone/tablet (Bluetooth)
VEGAPULS 6X • Two-wire 4 … 20 mA/HART
66376-EN-220111
For authentication, enter the 6-digit Bluetooth access code in the next
menu window. You can find the code on the information sheet "
Pins
and Codes
" in the device packaging.
Fig. 13: Enter Bluetooth access code
Note:
If an incorrect code is entered, the code can only be entered again
after a delay time. This time gets longer after each incorrect entry.
The message "
Waiting for authentication
" is displayed on the smart-
phone/tablet.
After connection, the sensor adjustment menu is displayed on the
respective adjustment tool.
If the Bluetooth connection is interrupted, e.g. due to a too large
distance between the two devices, this is displayed on the adjustment
tool. The message disappears when the connection is restored.
Parameter adjustment of the device is only possible if the parameter
protection is deactivated. When delivered, parameter protection is
deactivated by default and can be activated at any time.
It is recommended to enter a personal 6-digit device code. To do this,
go to menu "
Extended functions
", "
Access protection
", menu item "
Protection of the parameter adjustment
".
6.3 Parameterization
The sensor adjustment menu is divided into two areas, which are
arranged next to each other or one below the other, depending on the
adjustment tool.
•
Navigation section
•
Menu item display
The selected menu item can be recognized by the colour change.
Enter Bluetooth access
code
Connected
Change device code
Enter parameters
