14
5 Set up with the display and adjustment module
VEGAPULS 6X • Two-wire 4 … 20 mA/HART
66376-EN-220111
4. Enter the suitable distance value in m for empty vessel (e.g. dis-
tance from the sensor to the vessel bottom) corresponding to the
percentage value.
5.2.3 Extended settings
This menu item contains operational settings of the sensor.
Mode:
Country specific settings for the radar signals are determined via the
operating mode.
•
Mode 1: EU, Albania, Andorra, Azerbaijan, Australia, Belarus, Bos-
nia and Herzegovina, Canada, Liechtenstein, Moldavia, Monaco,
Montenegro, New Zealand, Northern Macedonia, Norway, San
Marino, Saudi Arabia, Serbia, Switzerland, Turkey, Ukraine, United
Kingdom, USA
•
Mode of operation 2: Brazil, Japan, South Korea, Taiwan, Thailand
•
Mode of operation 3: India, Malaysia, South Africa
•
Mode of operation 4: Russia, Kazakhstan
Note:
Depending on the operating mode, metrological properties of the
device can change (see chapter "
Technical data, input variable
").
Voltage supply:
The power supply determines whether the sensor is in operation
permanently or only in accordance with certain requirements.
5.2.4 Reset
During a reset, parameter settings made by the user are reset to the
values of the factory settings. You can fined the values in chapter "
Menu overview
".
Note:
The language and Bluetooth access code are not reset, a currently
running simulation however is aborted.
Mode
Reset
