38
6 Set up with the display and adjustment module
VEGAFLEX 81 • Profibus PA
44214-EN-171002
The respective min. and max. measured values are saved in the
sensor. The two values are displayed in the menu item "
Peak values,
measurement certainty
".
The measurement can be influenced by the process conditions. In
this menu item, the measurement certainty of the level measure
-
ment is displayed in mV. The higher the value, the more reliable the
measurement.
If you have selected interface measurement under the menu item
"
Setup - Application
", the peak values of the interface measurement
are displayed in addition to the peak values of the level measurement.
In another window you can carry out a reset of the two peak values
separately.
The respective min. and max. measured values are saved in the
sensor. The values are displayed in the menu item "
Peak values Ad-
ditional
".
This menu item displays the peak values of the electronics tempera
-
ture as well as the dielectric constant.
In another window you can carry out a reset of the two peak values
separately.
Information:
If one of the display values flashes, there is actually no valid value
available.
The menu item "
Echo curve
" shows the signal strength of the echoes
over the measuring range in V. The signal strength enables an evalua
-
tion of the quality of the measurement.
Diagnostics - Peak values
Measurement certainty
Diagnostics - Peak val-
ues, Additional
Diagnostics - Echo curve