12
3 Product description
VEGAFLEX 81 • Profibus PA
44214-EN-171002
The protective cover protects the sensor housing against soiling and
intense heat from solar radiation.
You will find additional information in the supplementary instructions
manual "
Protective cover
" (Document-ID 34296).
Screwed flanges are available in different versions according to the
following standards: DIN 2501, EN 1092-1, BS 10, ASME B 16.5,
JIS B 2210-1984, GOST 12821-80.
You can find additional information in the supplementary instructions
manual "
Flanges according to DIN-EN-ASME-JIS
".
The electronics module VEGAFLEX series 80 is a replacement part
for TDR sensors of VEGAFLEX series 80. There is a different version
available for each type of signal output.
You can find further information in the operating instructions manual
"
Electronics module VEGAFLEX series 80
".
The display and adjustment module can be optionally replaced by a
display and adjustment module with heating function.
You can use this display and adjustment module in an ambient tem
-
perature range of -40 … +70 °C.
You can find further information in the operating instructions "
Display
and adjustment module with heating
" (Document-ID 31708).
If the standard sensor housing is too big or in case of strong vibra
-
tions, an external housing can be used.
Then the sensor housing is made of stainless steel. The electronics is
located in the external housing which can be mounted in a distance of
up to 10 m (147 ft) to the sensor by using a connection cable.
You can find additional information in the operating instructions
manual "
External housing
" (Document-ID 46802).
Protective cover
Flanges
Electronics module
Display and adjustment
module with heating
External housing