Instruction Manual
VLB-67 LED Beacon
© Vega Industries Ltd, July 2014
VLB-67 LED Beacon
Page 48 of 52
VLB-67 V1.0.17
TVIR Programmer
Coding Scheme:
RC5 code with centre frequency 36.7 kHz
Dimensions:
87mm x 41mm x 6.5mm
Weight:
18gms
Power Supply:
1 x 3V lithium coin cell battery, CR2025 type
Battery Replacement on TVIR Programmer
Place the remote face down, and push the latch on the battery holder towards the centre of the
programmer case, while at the same time levering the slot on the battery holder outward as shown
in the illustration below.
Pull the battery holder out of the case.
Remove the old battery and insert a new one, ensuring that the + side of the battery is facing
upwards as shown.
Insert the battery holder into the programmer case, and press it until the latch clicks into place.