VeEX VEPAL CX350S-D3.1 Скачать руководство пользователя страница 103

Страница: 103 / 114

Test Profiles Management: Create, Edit, upload and download complex Ethernet and Fibre Channel test profiles (BERT,

Throughput, RFC2544, Y1564 SAM, Scan, IP, Ping/Trace, Packet Capture, etc)

Test Results Management: Download results from the test set, manage local test results (PC HDD), generate detailed test

reports, export to CSV or PDF, and print.

View software options, licenses, serial numbers, perform remote software updates

ReVeal is a Windows® application that can be downloaded free of charge from

www.veexinc.com

Users are able to connect remotely from a desktop PC via ReVeal tool software or through Remote Access on the test set. To

proceed with remote access, make sure that remote control software is installed on the PC device. The user is able to configure

the Profile, VNC Server Service, Web Service, VNC and Web passwords on the Remote Access page. Input the test set IP

address and specified user password when prompted by the software to initiate Remote Access.

Go back to 9.1.8 Remote Access

Go back to top

Go back to TOC

Remote access with VNC Server/Viewer:

The test set VNC service can be managed in >Utilities >Settings >More >Remote Access menu, to enable or disable the VNC

server and assign remote access passwords.

Super User Password:

Allows remote VNC clients to view and control the user interface via mouse

Regular User Password:

Allows remote VNC users (guests) to view what’s currently on the test set screen, but no

interactions with the GUI are allowed.

Although the test set VNC services allows multiple users to be connected simultaneously, it is a screen mirroring service, so all

users would be seeing and interacting with the same GUI. Such feature can certainly be used for training purposes, but it is not

recommended for multi-user or multi-test environments.

VNC clients, such as RealVNC®, are readily available for download for different platforms and form factors, including Windows®.

Mac OS®, Linux, iOS, Android.

VNC Service:

Enable or disable the remote access to remote VNC clients running on PCs, Macs, tablets or smart phones.

VNC Super User Password:

Defines the password for users allowed to control the test set via standard VNC clients

VNC Regular User Password:

Defines the password given to users who are only allowed to view the test set current

screen via standard VNC clients, but not make any changes to test or test set.

After configuring these settings in the Remote Access menu, run VNC on the PC. A message box will prompt the user to enter a

Server number, which is the test set IP address. Enter the VNC Super/Regular password when prompted by the message box for

a password.

Remote Access

VNC Viewer - Enter Server Address

CX350s-D3.1 e-Manual D07-00-102P RevA01

Page 98 of 109

Содержание VEPAL CX350S-D3.1



















































































































Результаты поиска

Содержание VEPAL CX350S-D3.1

Отзывы:

Похожие инструкции для VEPAL CX350S-D3.1

Бренды по названию

Популярные бренды

VeEX VEPAL CX350S-D3.1, Руководство пользователя

Результаты поиска

Содержание VEPAL CX350S-D3.1

Отзывы:

Похожие инструкции для VEPAL CX350S-D3.1

Бренды по названию

Популярные бренды