VeEX VEPAL CX350S-D3.1, Руководство пользователя

Страница: 41 / 114

Channel:
input your system's primary DOCSIS channel
DOCSIS Mode:
DOCSIS 3.0:
for DOCSIS 3.0 systems, with up to 32x8 Channel Bonding support.
DOCSIS 3.1
: optional, for DOCSIS 3.1 / OFDM systems
Note: Legacy DOCSIS 2.0/1.x systems are not supported.
Test Mode:
Terminate:
terminate mode
Pass Through:
emulating a stand-alone Cable Modem. Once the Cable Modem goes online, you can connect a PC to the
10/100/1000 Ethernet test port at the top of the unit. The meter will automatically assign a Client IP address to the PC. Then with
the PC, you can access the internet. This mode helps sectionalize and troubleshoot issues in the customer premises (e.g. replace
the actual cable modem).
Always On:
terminate mode and also enables the Cable Modem to remain online when you exit from the Cable Modem. This allows
you have online connectivity while using other features, such as Remote View and V300 R-Server access.
Once these settings are completed, press Connect. Once connect is pressed, the test set will go directly to the result page. Each step of
the connection process is listed. As a step is performed, an "in progress" indicator informs the user of the current status.
After a step is completed, a Pass or Fail status is provided. If any one of the steps fails during the connection process, the cable modem
will stop and declare a failed connection. At this point, the user can either choose to reset the test and try again, or go back to setup and
verify the settings.
DOCSIS Cable Modem (CM) Initialization Sequence