VeEX UX400, Руководство пользователя

Страница: 180 / 209

Tap the Overhead Generator icon to display the OH screens shown below. There are three tabs:
SOH TX
, which allows editing of select bytes associated with the Section Overhead. Editing of J0, K1, K2, S1 is permitted as follows:
Hexadecimal value using pop-up keypad.
Binary values using simple on-screen bit toggle or pop-up keypad.
Convenient drop-down selections. In some instances, the selections will be available over multiple pages.
Note: While programming of most overhead bytes is possible using the OH Generator feature, dedicated functions are available for Pointer Tasks, Payload Labels, Trace
Identifier, APS Testing, TCM testing. In some instances, more advanced editing is possible using the dedicated functions.
S1 Byte from SOH
POH TX
, which allows editing of select bytes associated with the Path Overhead.
Editing of J1, C2, H4, G1, Z5, and J2, V5, Z6 is permitted as follows:
Hexadecimal value using pop-up keypad.
Binary values using simple on-screen bit toggle or pop-up keypad.
Convenient drop-down selections. In some instances, the drop-down options will be available over multiple pages.
C2 Byte from POH
UX400 10G e-Manual D07-00-058P RevA00 Page 180 of 209