Introduction
Related Documents
It is important that installers have knowledge of all relevant procedures before installing a wireless system. Read
and understand all manuals thoroughly. If you do not understand a procedure, contact a certified contractor or
contact Veeder-Root. Each TLS Console has its own setup and installation manuals.
Related Documents
577013-796
ISD Vapor Flow Meter Installation Guide
577013-916
ISD Balance Flow Meter Installation Guide
577013-920
Carbon Canister Vapor Polisher Installation and Maintenance Guide
576013-623
TLS-3XX System Setup Manual
331940-012
TLS RF System Control Drawing
Safety Precautions
Retain and follow all product safety and operating instructions. Observe all warnings on the product and in the
operating instructions. To reduce the risk of bodily injury, electric shock, fire, or damage to the equipment, observe
the following precautions.
FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS AND SAFETY PRECAUTIONS COULD
CAUSE DAMAGE TO PROPERTY, ENVIRONMENT, RESULTING IN SERIOUS INJURY OR DEATH.
GENERAL PRECAUTIONS
Heed service markings: Opening or removing the console cover may expose you to electric shock. Servicing of
Veeder-Root equipment must be done by Veeder-Root authorized service contractors.
Use product with approved equipment: This product should be used only with Veeder-Root components identified
as suitable for use with the TLS RF Wireless System.
Use the correct external power sources: This product should be operated only from the type of power sources
indicated on the electrical ratings labels affixed to the components. If you are not sure of the type of power source
required, consult your Veeder-Root authorized service contractor.
When not in use, a longer battery life can be achieved by keeping the battery pack in a cool, dry location where the
temperature never exceeds 30°C or 86°F and does not go below 10° C or 50° F.
SPECIAL TOOLS REQUIRED
• #15 Torx screwdriver
• Small blade screwdriver (maximum blade width 3/32”)
• Wire strippers
Safety Symbols
The following safety symbols may be used throughout this manual to alert you to important safety hazards and
precautions.
EXPLOSIVE
Fuels and their vapors are extremely explo-
sive if ignited.
FLAMMABLE
Fuels and their vapors are extremely flammable.
19-3
ARB Approved IOM 19 - TLS RF Wireless 2 System (W2) Installation and Maintenance Guide - Executive Order VR-203 and VR-204
