TLC-FCR-2 Engineering Manual
Doc: 70-00-0081, Date: 20081219
© 2008 Vector Controls Ltd.
Page 1
TLC-FCR-2
Intelligent Fan Coil controller
Features
•
Low power energy consumption: < 1W per unit
•
Relays switching for outputs each up to 300W
•
Temperature control for 2 or 4-pipe fan coil systems.
•
Large temperature range from –40°C to 70°C (-40°F to 158°F).
•
Choose between one 3-point actuator and two binary
heating/cooling stages
•
Automatic fan control for three stage fans.
•
Cost saving option with Economy functionality and set point
limitations
•
Control for single stage heating, cooling and fan only operation
modes
•
Password protected programmable user and control parameters
o
Setpoint range limitation
o
Access control for setpoints, fan speeds and mode
change
o
Access control for heat/cool change and time programs
o
Select your display contents
o
Selectable behavior after return from power failure
•
Temperature display in Celsius or Fahrenheit
Deluxe Version:
•
Clock and time schedule functions
•
Blue backlight for LCD
•
Infrared remote controller option:
With special features for Boost and delayed switching on or off
Applications
•
Air Only Systems:
o
Constant Air Volume systems with three stage fans for single or dual duct systems
•
Air/Water Systems:
o
Fan Coil units for 2-pipe or 4-pipe systems
o
radiator control, chilled ceiling
•
Simple individual room control for hotel rooms, meeting rooms, etc.
General Description
The TLC-FCR-2 is a stand-alone electronic fan coil controller with one control loop. The TLC-FCR-2 features 1 NTC
temperature sensor input and four binary outputs (Relays).
A detailed parameterization is possible with the use of a simple configuration routine. The TLC-FCR-2 can be
configured using the standard operation terminal. No special tools or software is required.
Ordering
Item Name
Item code
Variant
Features
TLC-FCR-2
TLC-FCR-2-W01
40-10 0017
40-10 0017-01
Standard
Cooling only
Fan coil controller with:
1 TI int
3 DO (Relay) Fan control
2 DO (Relay) Binary valve control
TLC-FCR-2-D
TLC-FCR-2-D-W01
40-10 0018
40-10 0018-01
Deluxe
Cooling only
Selection of valve actuators and fans
Binary auxiliary devices: E.g. fans, on/off valves, etc. Do not directly connect devices that exceed 2(1.2)A. Observe
startup current on inductive loads! Do not connect more than one fan coil unit to one controller.
