VEB BERLIN SR59 Скачать руководство пользователя | Manualshive

Страница: 80 / 80

background image

distance sleeve sits inbetween these two bearings to prevent them from being pulled together when
tightening the axle. When the distance sleeve doesn´t have the approved length anymore, the rings
are pressed against the balls of the bearing, causing sluggish behaviour of the bearings which
leads to their quick destruction. This concludes, that not only the wheel bearings need to be
checked, but also the distance sleeve (Turning the wheel with loosened and tightened axle),
because both can be responsible for sluggish behaviour of the wheel.

How to remove the bearings:

1.

Remove wheel (see section 2.351).

2.

Dismantle rear hub as described in section 2.341.

3.

Hammer the axle out including the left hand side wheel bearing.

4.

Pull out right bearing, using a puller. The new bearings need to be well lubed.
Installation is done in reverse order.

6

Parts support – technical support

All spare parts for the city scooter „SR 59-Berlin“ can only be obtained through authorized dealers
or specialized retail stores. This includes parts that are manufactured by IWL as well as third party
parts excluding tires. It is pointless to order directly from the manufacturer.
There are enough authorized dealers within the GDR (German Democratic Republic) that monitor
our vehicles throughout their warranty period, and are made available in the event of damage. For
technical inqiuries that are directed directly to the manufacturer, make sure to add the part number
of the regarding part and the frame number of the scooter as well as it´s current mileage.

Note: Scooterstation offers full parts support for the SR59 Berlin scooter within the US. If you need
parts you can contact us at: (503)-231-2768 or e-mail us at [email protected]

Image 67. engine nr. on the engine case Image 68. VIN number on the frame

The frame number is found on the left hand side of the frame just behind the rear traverse. The
engine number is found on the left hand side of the engine case on the bottom. The type plate is
localized on the hood under the seats.

«
...
78
79
80

Содержание BERLIN SR59

















































































Отзывы:

Нет отзывов

Похожие инструкции для BERLIN SR59

Бренд: KEEWAY Страницы: 115

BREEZE JMY3000-BLK

Бренд: Jetson Страницы: 40

2006 Tahiti-150 YY125T-12

Бренд: Roketa Страницы: 23

Бренд: Tenways Страницы: 34

Бренд: Lambretta Страницы: 6

Бренд: Abilize Страницы: 20

TRANSFORMER S3021

Бренд: Enhance Mobility Страницы: 16

Бренд: Ossby Страницы: 11

Бренд: FREERIDER Страницы: 20

Бренд: Shoprider Страницы: 2

Бренд: 8Tev Страницы: 10

Бренд: DAELIM Страницы: 188

Бренд: Uebler Страницы: 52

Бренд: Zedler Страницы: 58

Mi Electric Scooter M365

Бренд: Xiaomi Страницы: 13

DISCOVERY ROSEMONT LE1

Бренд: Igo Страницы: 25

Бренд: Suzuki Страницы: 185

Бренд: Acer Страницы: 35

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды