VEB BERLIN SR59 Скачать руководство пользователя | Manualshive

Страница: 45 / 80

background image

Do not over adjust. Make sure that the wheels turn without the brakes grinding after adjustment.
Brake drums should be opened every 3000 miles, to clean the inner parts of the brakes. The
armature plate with brake pads and straddle mechanism can be pulled out after first having
removed the front wheel. This task is a little more difficult for the rear brake. After having taken out
the rear wheel, rubber housings of the chain need to be removed from the cover plate and taken
off. Then the master link of the chain is to be opened (Make sure to leave the chain in the rubber
housings). After loosening the axle nut and the brake retainer screw, the entire rear wheel hub
including chain and rubber housings can be removed. The three screws of the chain housing are
taken out and the housing lid removed. The sprocket wheel is pulled out after the three nuts have
been taken out. Afterwards the armature plate can be pulled out, revealing the brake mechanism.
By removing the three countersinks, the brake drum can be removed.
All inner parts are to be thoroughly cleansed, the brake pads checked for wear and immaculate
adhesive sealing as well as the right bevel on their ends. All pivot points and spring loops are to be
lubricated

ever so slightly

.

Simultaneously the hub´s ball bearings are to be washed out in fuel and regreased afterwards.

2.35

Axles and wheels

The front axle is a regular axle with „drop out“ ends

.

The rear axle is a simple rod axle. The front

and rear axles are equipped with two ball bearings each. The speedometer is actuated from the
front hub through a helical gear and a shaft drive. The rims are designed as full disc

Image 41. rear wheel brake

wheels and are made from light alloy. The 2.50 Cx12“ drop base rims are mounted with 3.50-12“
tires. The five hole wheels are exchangeable from back to front, meaning that the rear wheel can
also be used as front wheel and vice versa.

«
...
43
44
45
46
47
...
»

Содержание BERLIN SR59

















































































Отзывы:

Нет отзывов

Похожие инструкции для BERLIN SR59

Бренд: iENYRID Страницы: 3

Бренд: Razor Страницы: 12

125 AGILITY MMC

Бренд: KYMCO Страницы: 1

Бренд: Vintage Electric Страницы: 19

Бренд: Nipponia Страницы: 27

Бренд: Fortis Страницы: 20

Бренд: flyscooters Страницы: 43

NS125III - SERVICE

Бренд: DAELIM Страницы: 203

Бренд: Cannondale Страницы: 20

Бренд: HOMCOM Страницы: 9

Бренд: Ignite Страницы: 7

Бренд: Hudora Страницы: 8

Бренд: Orthoquad Страницы: 15

Бренд: IU Страницы: 16

Бренд: Cycleboard Страницы: 32

Бренд: Bluewheel Страницы: 62

Бренд: Kinroad Страницы: 32

Бренд: Monzana Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды