VEB BERLIN SR59, Руководство по эксплуатации

Страница: 55 / 80

3.103 Ignition and lightswitch
The combined ignition and lightswitch unit is found on the left hand side of the instrument panel like
already described in section 2.38. The ignition key can be pulled out in positions 0 and 1.
Relevance of the key settings:
Position 0: Ignition and lights switched off – key removable (Parking during daylight)
Position 1: Ignition switched off, parking lights (rear and front) on – key removable
(Parking at night)
Position 2: Ignition switched on, light switched off, - key not removable (For kickstarting
engine and driving during daylight)
Position 3: Ignition switched on, parking lights (rear and front) switched on – key not
removable (For city driving at night with city lights)
Position 4: Ignition switched on, head light and taillight switched on – key not removable
(For driving at night)
Position 5: Ignition switched on (however, no red pilot light), lights switched off – key not
removable. (This is the setting for push starting the scooter in 1
st
or 2
nd
gear
due to empty or missing battery)
When switching on the ignition, the red pilot light goes on (except when in position 5) to
acknowledge contact between the ignition coil and the battery. When the engine is being
accelerated, the red pilot light must go out. If the red pilot light does not go on when the ignition is
switched on, or if the pilot light does not go out when accelerating, it means that the equipment is
malfunctioning. An immediate search and repair of the error is necessary. (See section 4.32).
Also the green neutral gear pilot light on the left hand side of the instrument panel must light up
when the ignition is switched on. If this is not the case, disengage gear and bring it into neutral
using the foot gear switch before kickstarting the scooter. Neutral can be found inbetween 1
st
and
2
nd
gear.
When parking the scooter with parking lights on, leave the ignition on position 1. It is also
advantageous to not have the headlight on, while kickstarting the scooter to avoid unnecessary
weakening of the spark. Only turn the headlight on, when the scooter is running.
The horn is only active on ignition positions 2, 3, 4 and 5, to prevent unauthorized access when the
scooter is parked.