Appendix D: Manual service reset
109
BMW
BMW 3 Series (E46), BMW 7 Series
(E38), BMW 5 Series (E39) and
BMW X5 (E53) BMW X3 (E83) and BMW Z4 (E85)
Button
A
arrowed in illustrations
The Service Interval Display (SIA) can be reset using the reset button for the trip
distance recorder on the instrument cluster
Note:
The distance-based inspection can only be reset if approximately 10 litres of fuel
have been used since the previous reset was performed. The time-based inspection
can only be reset if approximately 20 days have passed since the previous reset was
performed
1. Switch ignition OFF.
2. Press and hold button
A
.
3. Keep button depressed and switch the ignition to position I.
4. Keep button depressed for 5 seconds, until the service status is displayed.
5. The display will now indicate the remaining distance to service and the type of
service required (OIL SERVICE or INSPECTION). If the remaining distance is
displayed with
'rSt'
then the service interval can be reset.
6. To reset the distance to service limit press button
A
for 5 seconds. The
'rSt'
(or
reset) will flash on the display. If the reset is not required then wait until the
'rSt'
(or reset) has stopped flashing before continuing. To reset press button
A
again
before
'rSt'
has flashed 5 times to reset the service distance limit. The new
distance to service will be displayed for 5 seconds.
Note:
For vehicles that do not include time-based inspection then 'End SIA' will
be displayed with the remaining distance until the next service. For vehicles that
CO
N
0073
A
A
Содержание CONTISYS OBD -
Страница 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN ...
Страница 2: ......
Страница 143: ......
Страница 144: ......
