Installing the unit
The navigation radio can be installed into a vehicle’s DIN radio slot using the installa-
tion bracket provided.
■
Note before installing, Fig. 13:
✎
The radio must be installed horizontally. Deviations of - 10 to + 30 degrees can be
set in the “Mount. angle” menu (see “Checking installation” section). Larger devia-
tions may result in malfunctions.
✎
A rigid connection to the vehicle body is a prerequisite for correct functioning of
the system
■
Connecting the unit, Fig. 11
1. Connect the GPS antenna connector to the GPS antenna socket on the back of the
unit.
2. Insert antenna plug E into the antenna socket. If necessary, use a suitable antenna
adapter. Use the hook (J) on the back of the unit for secure attachment.
3. Insert ISO plug A (power supply) into the radio ISO socket A’.
4. Insert ISO plug B (loudspeakers) into the radio ISO socket B’.
If extensions are to be connected to the unit (optional):
5. Push all chamber C plugs together and insert them into the radio ISO socket C’. Insert
the green connector C2 between the yellow connector C1 and the blue connector C3.
At least one of these connectors is required for C2 to engage into the socket:
Yellow plug C1: Left chamber of ISO socket C1’.
Green plug C2: Centre chamber of ISO socket C2’.
Blue connector C3: Right chamber of the ISO socket C3’.
■
Mounting the unit, Fig. 8 - 10
1. Insert the installation bracket into the DIN slot and bend the appropriate metal tabs
inwards using a screwdriver (Fig. 8 - 9). Take care not to damage any hidden parts in
the dashboard.
2. Check that all the required leads are connected to the unit.
3. Push the unit into the installation bracket until it engages (Fig. 10).
■
Removing the unit, Fig. 14
1. Detach the removable operating panel.
2. Push both angled removal tools into the small holes to the right and left of the unit
front until they are felt to engage.
3. Gently push the removal tools outwards and carefully pull the radio out of the instal-
lation bracket.
Installation instructions
5
