Chapter 3 Connecting Optional Accessories
3-2
VCON MediaConnect 9000 Installation & Setup Guide
3.1
Connecting a VCR for Playback to the
Videoconference
The MediaConnect 9000 system supports the playback of a videocassette to a
videoconference.
➤
To connect a VCR to the videoconferencing card’s panel for playback
1. Connect the VCR cable with the (usually yellow) jacks between the
VIDEO OUT connector of the VCR and the
VCR VID IN
(yellow)
connector of the videoconferencing card.
2. Connect the VCR cable with the (usually white) jacks between the
AUDIO OUT connector of the VCR and the
VCR AUD IN
(white)
connector of the videoconferencing card.
3. Verify that the VCR is connected to a power supply.
For specific instructions on installing and operating the VCR, see its accompanying
user’s guide.
Connecting to VCR for Playback to the Videoconference
CAUTION
Make sure that the computer and the VCR are turned off.
