vc999 RS420, Руководство по обслуживанию

Страница: 44 / 157

TROUBLESHOOTING GUIDE
DIE BOTTOMS
DIES ACTIVATING SLOWLY OR NOT AT ALL (cont’d)
•
Check the lifting system lubrication.
•
Check the die lift cylinder for damage or air pressure loss.
•
Check the air lines to the die lift cylinder for damage or pressure loss.
•
If the die lift cylinders are equipped with quick exhausts, check them for proper
function or contamination.
•
Check the blue 740 valves in the pneumatic cabinet, V1-V4, for contamination or
possible air pressure loss.
DIE TOPS
WATER LEAKS IN DIE
•
Check o-ring between die and utility block
•
Check water hose
•
Check seal die top, calcium build up in the dies
•
Clean and remove calcium deposits
FORMING SYSTEM
WRINKLE IN POCKET/POCKETS NOT FORMED WELL
•
Check heating / forming time
•
Check heating / forming pressure
•
Check filler plates, use only aluminum plates
•
Check air line to die for damage
•
Check water, water temperature should be 50F-80F(10C-27C)
•
Check temperature of supply air, cold air used during air forming can cause poor
package form from premature cooling of the film
DAMAGED POCKETS
•
Check radius plate for damage
•
Check film thickness and draw depth, use heavier material for deeper pockets
FORMING DIE WHISTLES
•
Check 4 mm silicone cord for wear or damage
•
Check forming / heating pressure, decrease in pneumatic cabinet
•
Decrease forming time
•
Check die gap