vc999 RS420, Руководство по обслуживанию

Страница: 31 / 157

MAINTENANCE
•
Each die lock mount will need to be adjusted independent of the other.
•
Each time the die lock mount adjustment screws are adjusted; the mounting bolts will
need to be loosened, separate the die lock mount from the utility block and
retightened the mounting bolts .
o
To retighten mounting bolts , hold down on the die lock to ensure it is in the proper
position.
•
A ¼ turn of the die lock mount adjustment screw is equal to 0.33mm (0.013 inches).
•
Adjust die locks until they move in and out of position freely but still make contact
with the wear pad when in the locked position.
o
The die lock contact wheel must be able to be rotated by hand and in contact of the
wear pad when engaged for proper clearance.
•
Place the die top back on the machine and close the die.
•
Operate the die locks to the locked position to check for correct adjustment.
Note: The die lock mounts are not shown for clarity.