vc999 RS420, Руководство по обслуживанию

Страница: 20 / 157

NOTE: SOME MACHINES MAY HAVE MORE OR LESS PUSHBUTTONS
DISPLAYED DEPENDING UPON THE MACHINE OPTIONS.
•
CUTTING, SEALING, INDEX, FORMING, PRINTER, & ZIPPER
:
THESE BUTTONS WILL
DISPLAY MANUAL CONTROL SCREEN FOR THAT AREA OF THE MACHINE.
•
SEAL DIE TEMP SET
:
ENTER SEAL DIE TEMPERATURE SETTING (DEG C)
•
VACUUM PUMP SHUTDOWN DELAY
:
SET TIME (sec) THAT THE VACUUM PUMP WILL
RUN AFTER END OF AUTO CYCLE BEFORE SHUTTING DOWN.
•
VACUUM PUMP SERVICE HOURS
:
VACUUM PUMP HOURS SINCE LAST TIMER RESET
•
TOTAL MACHINE CYCLES
:
COUNTS CYCLES MACHINE PERFORMS IN AUTO CYCLE.
•
TOTAL VACUUM PUMP HOURS: TOTAL HOURS OF VACUUM PUMP OPERATION.
THIS METER IS NOT RESETABLE.
•
VACUUM PUMP SERVICE HOURS RESET: RESETS VACUUM PUMP SERVICE HOUR
METER. THIS SHOULD BE PRESSED AT THE END OF EVERY VACUUM PUMP
SERVICE.
•
CROSS CUT MAINT RESET: RESETS CROSS CUT SERVICE HOUR METER.
•
SET PASSCODE: OPENS PASSWORD SCREEN. THIS SCREEN ALLOWS YOU TO
CHANGE ALL PASSWORDS. YOU MUST HAVE MASTER PASSWORD TO OPEN THIS
SCREEN.
•
ENTER LICENSE CODE: WILL APPEAR AFTER THE 24
th
DAY OF THE MONTH. THIS
BUTTON WILL OPEN THE PAYMENT CODE SCREEN. OPENING THIS SCREEN WILL
ALLOW YOU TO ENTER THE NEXT MONTHS PAYMENT CODE BEFORE THE END OF
THE MONTH.
•
VACUUM SENSOR CALIBRATE: (OPTIONAL) OPENS VACUUM SENSOR CALIBRATION
SCREEN.