vc999 RS420 Скачать руководство пользователя страница 12

Страница: 12 / 157

TRANSPORTATION

•

Always lift the forming and sealing stations of the rollstock separately.

•

If the machine is completely assembled, it is necessary to use two forklifts or pallet-

jacks to move the machine.

•

NEVER

lift the machine by the loading or discharge areas; as they will not support

the weight of the machine.

•

Always lift the stations from the back side as shown in the illustration below.

•

Take special care when moving the machine not to damage the film systems.

•

Before moving the machine, remove all external equipment and/or exit conveyors.

•

When lifting the separate stations, be careful not to put stress on the electrical or

pneumatic lines that connect the two stations.

•

The maximum separation of the stations during this process should be no more than

the loading area length (see specifications).

Содержание RS420






























































































































































Результаты поиска

Содержание RS420

Отзывы:

vc999 RS420, Руководство по обслуживанию, Страница: 12 / 157

Результаты поиска

Содержание RS420

Отзывы: