PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting to know your machine
Recline pedal
On/Off
pedal
Handle lock dial
Handle
Boost trigger
Dirty water tank
release latch
SpinScrub brushes
and brushbar
Nozzle release clip
Accessory hose
connector cover
Dirty water tank
Wash/Rinse dial
Nozzle
Hose/Solution
and pre-treatment
wand connection
port (hidden)
Solution tank cap
Clean water tank cap
Clean water tank
Clean water/Solution
tank release button
Technical Specification
Name
Dual Power Pro Tech
Code
W85-PL-T
Part number
1-1-134979-00
Voltage
Please refer to product rating label
Wattage
Please refer to product rating label
Cord length
9m
Weight
9.5kg
Subject to technical change without notice.
Accessories & Consumables
Ultra+ carpet cleaning solution (1.5l)
1-9-132706-00
Ultra+ Pet carpet cleaning solution (1.5l)
1-9-132707-00
Ultra+ Refresh & Revitalise (1.5l)
1-9-133260-00
Ultra+ Allergen (1.5l)
1-9-133262-00
Ultra+ Sanitise (1.5l)
1-9-133261-00
*
To purchase consumables and accessories, please visit
vax.co.uk
Getting started
Quick cord
release hook
Trigger (hidden)
IMPORTANT:
Carpets should be dry vacuumed thoroughly before washing
Test for colourfastness - Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/rugs/
upholstery gently rub with the dampened cloth. Wait ten minutes and check for colour removal or bleed with a white
paper towel or cloth. If your carpet has more than one colour, check all colours. Test your carpet/rugs/upholstery –
Run the carpet washer over a small hidden area. If no pile distortion occurs continue cleaning. When cleaning an entire
room, move furniture out of the area to be cleaned. If the furniture cannot be moved, place aluminium foil or wax paper
under the legs. This will prevent wood finishes from staining your carpet. Pin up furniture skirts and curtains. When using
the carpet washer, basic safety precautions should always be observed and don’t over saturate your carpets. Only use
Vax carpet solution. Using other solutions may cause excess foaming and will invalidate your guarantee. The clean water
tank should only be filled with warm water (max 40’C). Filling the clean water tank with hot/boiling water will damage
your machine and invalidate the guarantee. This is a powerful carpet washer, before plugging in make sure all controls are
turned off also hold carpet washer firmly when staring and during use.
Assembling your vacuum cleaner
Stand the base of carpet
washer on the floor in the
upright position.
Turn handle lock dial
clockwise to lock
in position.
Tilt clean water/solution
tank and line up onto carpet
washer. Push tank back until
it clicks into place.
Slide SpinScrub tool holder
over and down handle.
Line up SpinScrub tool with holder,
slide tool down holder and into place.
render wrong
