Using your machine
Using your machine
Extension tube
Remove extension tube
from inside the handle.
Turn the extension tube and
attach to the handle.
Using accessories
Remove hose end from
the floorhead.
Attach hose to the top of
the handle.
Push accessory on to the
extension tube.
Choose an accessory.
Attach accessory adapter to
hose end.
If required use
tool connector.
Hold the machine to steady
when using on the stairs.
Always make sure the
brushbar is overhanging the
stair tread during use.
Using your machine on the stairs
This machine has a constantly
rotating brushbar. When using the
machine on stairs, ensure the height
adjuster dial is set to hard floor and
the brushbar is overhanging the
stair tread (as pictured). Always take
extra care when cleaning stairs.
CAUTION
Twist the quick release
cord hook to release the
power cord.
How to use
Before you begin cleaning
• Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and
emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat
will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug from electrical
socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum cleaner to cool
for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters to fully dry before putting back into
the vacuum).
• Filters require cleaning at least every 3 months.
• If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
• When using the accessories always make sure the brushbar is switched to the off position.
IMPORTANT:
When the vacuum cleaner is stood in the upright position or when using on stairs and the hose/tools, the
brushbar height adjust dial must be set to hard floor.
Choose your desired carpet
height or hard floor setting.
Plug in your machine and
push On/Off button to
switch on.
Don’t over fill the dirt
container to avoid clogging
your filter.
TIP
To ensure the Hard Floor Adaptor
is correctly fitted, the wheels
should be towards the back of
the floor tool when attached to
vacuum cleaner.
Lie vacuum cleaner on its
back exposing brushbar.
Align Hard Floor Adaptor
with base of vacuum
cleaner, push until its clicks
into place.
Using the Hard Floor Adaptor
Apply the Hard Floor Adaptor for optimum results on hard floors.
The Hard Floor Adaptor can be used on any floor setting.
U85-E2-BePeRe_EnergisePulse_UG_100914_PRINT.indd 8-9
12/09/2014 14:24
