Assembling your upright
Getting started
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Insert the back panel into
the floorhead.
Insert the lower quick release
cord hook into the hole at the
bottom of the back panel.
Now take the small clip and
push it down between the
post-motor filter cover and
back panel, over the quick
release cord hook to lock
into place.
Insert the short end of the
hose into the tube at the back
of the machine and connect
the hose end to the floorhead.
Attach hose clip to the
air inlet tube.
Place the dirt container onto
the machine and push until it
clicks into place.
Insert the extension tube into
the handle.
Push handle into the top of
the machine until it clicks
into place.
Plug in and switch on
your machine.
Push TurboTool holder on to
the handle.
Clip TurboTool into position.
Handle
TurboTool holder (hidden)
Post-motor filter cover
Hose to
machine
connector
Floor type
adjustor
Handle release button
Separator
Dirt container
Hose holder
Dirt container
release button
Extension tube
Power
On/Off button
Hose
Power cord
Quick release
cord hook
Getting to know your machine
Technical Specification
Name
Energise Pulse
Voltage
Please refer to product rating label
Wattage
Please refer to product rating label
Cord length
8m
Weight
7kg
Accessories & Consumables
Filter Kit (Type 98)*
1-1-134233-00
Belt Kit (Type 1)*
1-1-130669-01
TurboTool (Type 6)*
1-1-134173-00
Subject to technical change without notice.
*
To purchase consumables and accessories, please visit
vax.co.uk
U85-E2-BePeRe_EnergisePulse_UG_100914_PRINT.indd 6-7
12/09/2014 14:23
