Removing debris from the brushbar
Taking care of your machine
Taking care of your machine
Cleaning the shroud
Turn the dirt container
lid anti-clockwise and lift
to remove.
24hr
MAX
40˚C
Remove the pre-motor filter
to allow access to
the shroud.
Tap the shroud over a bin to
remove dirt and debris.
Wash the shroud under
running water and leave to
fully dry before placing back
into the machine.
Post-motor filter maintenance
Twist post-motor filter
cover anti-clockwise and lift
to remove.
Remove the filter.
Check the post-motor filter
for discolouration.
Emptying and cleaning the dirt container
Press dirt container
release button to remove
the dirt container.
Hold dirt container over
a bin and unclip the lock
on the bottom of the dirt
container, allowing the dirt
to fall out.
Close the base of the dirt container, align the
dirt container base back onto the machine
and push until it clicks back into place.
Cleaning the pre-motor filter
Turn the dirt container
lid anti-clockwise
to remove.
Lift the dirt container lid
to remove.
TIP
Wash filters with warm water
(MAX 40°C) at least every 3 months.
Tap the filter over a bin to
remove the dirt.
MAX
40˚C
24hr
Wash the filter under
running water (40°C max).
Leave to fully dry for at
least 24 hours before
placing back in
the machine.
Tap the filter over a bin to
release and dirt.
Always switch the machine off
and unplug before carrying out
any maintenance.
CAUTION
Switch off your vacuum cleaner at the main socket.
Using a pair of scissors cut any hair or debris free
from around the brushbar.
U85-E2-BePeRe_EnergisePulse_UG_100914_PRINT.indd 10-11
12/09/2014 14:24
