95
Instruments, controls
Functions:
z
Range
z
Instantaneous consumption
z
Distance travelled
z
Average speed
z
Effective consumption
z
Average consumption
z
Stop watch
To select, rotate the rotary switch on the
wiper stalk briefly up
i
or down
h
for
each function and then let go. The
functions will be called one after the other.
Range
Range is calculated from current fuel tank
content and instantaneous consumption.
The display shows average values.
After refuelling, the vehicle updates the
range automatically after a brief delay.
If less than 20 miles (30 km) can be driven
with the fuel in the tank, the warning
"REFILL" appears on the display.
Confirm the warning message by
pressing
0
on the wiper stalk.
Instantaneous consumption
Display changes depending on speed:
Distance travelled
Display of miles (kilometres) driven. The
measurement can be reset to zero and
restarted at any time - see "Resetting trip
computer to zero".
Average speed
Calculation of average speed. The
measurement can be reset to zero and
restarted at any time - see "Resetting trip
computer to zero".
Stoppages in the journey with the ignition
off are not included in the calculations.
Effective consumption
Display of fuel consumption. The
measurement can be reset to zero and
restarted at any time - see "Resetting trip
computer to zero".
Average consumption
Calculation of average consumption. The
measurement can be reset to zero and
restarted at any time - see "Resetting trip
computer to zero".
Resetting trip computer information to
zero (Reset)
Select the desired trip computer function:
rotate the rotary switch on the wiper stalk
briefly up
i
or down
h
for each function
and then let go. To reset a value to zero,
hold down the button
0
on the wiper stalk
for more than three seconds: this restarts
measurement. To reset all functions at the
same time, hold down the button
0
for
more than 6 seconds.
All trip computer information, apart from
range and instantaneous consumption,
can be reset.
Stop watch
Select function using rotary switch
i
or
h
,
Display in gal/h
Below 8 mph
(13 km/h)
Display in miles/gal
Above 8 mph
(13 km/h)
Press button
0
:
Start/Stop
For longer than
three seconds:
Reset to zero
Ofrecido por www.electromanuales.com
