111
Lighting
Main beam, headlight flash
Push stalk forwards to switch from dipped
beam to main beam.
To switch to dipped beam, push stalk
forwards again or pull towards steering
wheel.
To operate the headlight flash, pull stalk
towards steering wheel. The main beam is
switched on for as long as the stalk is held
in this position.
The blue control indicator
C
is illuminated
when main beam or headlight flash is on
(see page 89).
Automatic dipped beam
activation A
3
Light switch to
A
: Dipped beam switches
on or off automatically when the engine is
running depending on outside light
conditions.
The exterior lights switch off when the
ignition is switched off.
For reasons of safety, the light switch
should always remain in the
A
position.
If visibility is poor (in foggy conditions, for
example) turn light switch to
9
.
Turn signal lights
Push stalk up or down to activate:
After operation, the turn signal stalk
returns to its starting position.
If the stalk is moved past the resistance
point, the turn signal light remains on.
When the steering wheel moves back
towards the straight-ahead position, the
turn signal light is automatically
deactivated.
Move the stalk to the resistance point and
hold for the turn signals to flash longer.
Switch the turn signal off manually by
moving the stalk slightly.
Stalk upwards
=
Right turn signal
Stalk downwards
=
Left turn signal
Ofrecido por www.electromanuales.com
