78
Seats, interior
Activation
Ensure the airbag systems for the front
passenger’s seat are activated when a
passenger of adult size occupies the front
passenger’s seat.
With the vehicle stationary and the ignition
switched off, proceed as follows:
z
switch on ignition, control indicator
*
flashes, the LEDs in the button display
the current status – see page 77,
z
press button
*
within 15 seconds and
hold down,
z
after about 2 seconds, you will hear a
confirmation buzzer. Release button
*
after another 4 seconds at the latest.
The airbag systems for the front
passenger’s seat are now activated. To
indicate this, LEDs in button
*
and control
indicator
*
in the odometer display must
not be illuminated.
If the LEDs or control indicator
*
are
illuminated, the airbag systems for the
front passenger’s seat will not be triggered
in the event of an impact.
Control indicator
*
for front passenger’s
airbag system deactivation
When the ignition is switched on,
*
flashes
for approx. 15 seconds. The airbag
systems for the front passenger’s seat can
only be activated or deactivated during
this time. Both LEDs illuminated in
button
*
and illumination of control
indicator
*
indicate deactivated airbags,
but if the LEDs and control indicator
*
are
not illuminated, the airbags are activated
and will be triggered in the event of an
impact.
Starting the engine terminates changing of
the setting.
The setting can then only be changed once
the ignition has been switched off and then
back on again.
Ofrecido por www.electromanuales.com
