106
Instruments, controls
Stop watch
Select menu item
Timer
from the
Board
Computer
menu.
The
Timer
menu is displayed.
To start, select menu item
Start
.
To reset, select menu item
Reset
.
The desired stop watch display can be
selected from the
Options
menu
3
:
Driving Time excl. Stops
The time the vehicle is in motion is
recorded. Stationary time is not included.
Driving Time incl. Stops
The time the vehicle is in motion is
recorded. The time the vehicle is stationary
with the key in the starter switch is
included.
Travel Time
Measurement of the time from manual
activation via
Start
to manual deactivation
via
Reset
.
Interruption of power supply
If the power supply has been interrupted or
if the battery voltage has dropped too low,
the values stored in the trip computer will
be lost.
Check control
3
Check control monitors the remote control
battery
3
, the brake light switch, as well as
important exterior lights, including the
cable and fuses.
Warning messages appear on the display.
If there are several warning messages, they
are displayed one after the other.
Some of the warning messages appear on
the display in an abbreviated form.
Ü
Board Computer
19,5° 19:36
BC 1
BC 2
00:00:00
Timer
Start
Reset
Options
Ofrecido por www.electromanuales.com